“电镀丝印UV油墨”参数说明
是否有现货: | 是 | 认证: | SGS |
保质期: | SGS | 固着速度≤: | 0.001 |
干性≤: | 0.2 | 细度: | 1500 |
单件净重: | 1008 | 用途: | 金属UV油墨 |
颜色: | 不限 | 流动度≥: | 1500 |
适用对象: | 电镀、真空电镀、塑胶电镀 | 粘度: | 1500 |
着色力: | 100 | 品牌: | 欧莱斯 |
型号: | UV130 | 规格: | 1公斤 |
商标: | 欧莱斯 | 包装: | 按订单 |
产量: | 10000 |
“电镀丝印UV油墨”详细介绍
1.歐萊斯电镀丝印UV油墨
2. 油墨特性:
耐曬級別高,防紫外線效果好,高遮蓋力,固化後對極性底材具有優異的附著力,墨層均勻,顏料分散性好,不幹網,過網性、流平性良好,塗膜具有較高的硬度、光澤及良好的耐水性、耐候性、耐化學藥品性。
3. 油墨技術參考
粘度:5000-15000CPS(因溫度、顏色而異)
細度:5um↓
附著力:5B優
自幹:25℃時,24小時固化;烘幹:60℃時,30分鐘固化
過網性能:300~400目網紗 塗覆面積:40-60㎡/㎏
稀釋劑:L-3慢幹水
耐光等級:>7級
4. 油墨使用方法
受到汙染的素材應在表面用去漬油清洗或擦拭,以利於印刷效果優異。
印刷錯誤時,應待其未完全幹燥前用抹字水去除,重新再印。
印刷過程中遇到網版堵塞之狀況,應先用洗版水清洗之後再印刷。
附著力、硬度、耐酸性、耐油性、耐去漬油性、抗劃傷性、耐磨性等性能的檢測,需要
墨層完全固化後方可檢測。1 oleser UV resistant metal ink
2 ink characteristics:
The high light level, anti UV effect, high hiding power, after the curing of polar substrate with excellent adhesion, ink layer uniformity, good pigment dispersion, not dry, over the n e t, good leveling, coating has high hardness, gloss and good water resistance, weather resistance, chemical resistance.
3 ink technology reference
Viscosity: 5000-15000CPS (due to temperature, color and different)
Fineness: 5um case
Adhesion: 5B
Dry: 25 degrees, 24 hours of curing; drying: 60 degrees, 30 minutes of curing
The n e t performance: 300~400 mesh gauze coated area: 40-60 square meters / kg
Diluent: L-3 retarder
Light grade: >7
4 ink usage
Contaminated material should be used to clean or wipe off the surface of the oil, in order to benefit from the printing effect.
The printing error, should be not c o mpletely dry before use with water to remove the word, re printed.
The blocking situation encountered in screen printing process, should first wash water cleaning printing.
Detection of adhesion, hardness, acid resistance, oil resistance, resistance to stains oily, scratch resistance, abrasion resistance and other properties, need
Ink layer c o mpletely solidified rear can be detected.
2. 油墨特性:
耐曬級別高,防紫外線效果好,高遮蓋力,固化後對極性底材具有優異的附著力,墨層均勻,顏料分散性好,不幹網,過網性、流平性良好,塗膜具有較高的硬度、光澤及良好的耐水性、耐候性、耐化學藥品性。
3. 油墨技術參考
粘度:5000-15000CPS(因溫度、顏色而異)
細度:5um↓
附著力:5B優
自幹:25℃時,24小時固化;烘幹:60℃時,30分鐘固化
過網性能:300~400目網紗 塗覆面積:40-60㎡/㎏
稀釋劑:L-3慢幹水
耐光等級:>7級
4. 油墨使用方法
受到汙染的素材應在表面用去漬油清洗或擦拭,以利於印刷效果優異。
印刷錯誤時,應待其未完全幹燥前用抹字水去除,重新再印。
印刷過程中遇到網版堵塞之狀況,應先用洗版水清洗之後再印刷。
附著力、硬度、耐酸性、耐油性、耐去漬油性、抗劃傷性、耐磨性等性能的檢測,需要
墨層完全固化後方可檢測。1 oleser UV resistant metal ink
2 ink characteristics:
The high light level, anti UV effect, high hiding power, after the curing of polar substrate with excellent adhesion, ink layer uniformity, good pigment dispersion, not dry, over the n e t, good leveling, coating has high hardness, gloss and good water resistance, weather resistance, chemical resistance.
3 ink technology reference
Viscosity: 5000-15000CPS (due to temperature, color and different)
Fineness: 5um case
Adhesion: 5B
Dry: 25 degrees, 24 hours of curing; drying: 60 degrees, 30 minutes of curing
The n e t performance: 300~400 mesh gauze coated area: 40-60 square meters / kg
Diluent: L-3 retarder
Light grade: >7
4 ink usage
Contaminated material should be used to clean or wipe off the surface of the oil, in order to benefit from the printing effect.
The printing error, should be not c o mpletely dry before use with water to remove the word, re printed.
The blocking situation encountered in screen printing process, should first wash water cleaning printing.
Detection of adhesion, hardness, acid resistance, oil resistance, resistance to stains oily, scratch resistance, abrasion resistance and other properties, need
Ink layer c o mpletely solidified rear can be detected.